Upgrade TIMOS to R13.0r12-1
We need to make a change to BT\'s UK Core Network that will unfortunately impact your services.
A list of your impacted services is attached;
this information is also available via WCR.
(This could take up to 48 hours)
We\'re upgrading some 21C network hardware and software in the SLEAFORD TE region. This involves a software upgrade and some hardware changes on the device in a single night.
The outage to all customers will be after 01:00 for approx. 15 minutes whilst the device is rebooted. This could extend to 60 minutes if roll back is required to reboot to the old code.
Customers may experience a second outage of about 60 minutes while we upgrade the interface card connecting their circuit. This could be extended to 2 hours if roll back is required.
We plan to be finished by 04:00 , however if we encounter additional problems, service outage could extend to 06:00
SLEAFORD TE
Upgrade TIMOS to R13.0r12-1 The above change has been completed. Please be aware the actual end of the work may not match the time you receive this email. If the work was fully completed, you will receive no further updates. If the work was only partially completed, you may receive a fresh Change notification at a later date. If the work was fully rolled-back, or not deployed you will be re-advised if work is to be rescheduled for your services. If this change has failed to incident further notifications will follow via BT\'s incident process. \t
Upgrade TIMOS to R13.0r12-1 The above change on the BT UK Core Network has started. Please be aware the actual start of the work may not match the time you receive this email. N/A You will be notified when this work has been completed. \t